cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Customer Interest:|631107|Page 5425 > < Vacuum Controller, HVAC|Locations
Page 1
background image

Vacuum Harness HVAC: Customer Interest
HVAC - Stuck in Defrost Mode After Replacing Programmer

File In Section: 1 - HVAC

Bulletin No.: 63-11-07

Date: May, 1996

Subject: 
HVAC System Stuck in Defrost Mode afier Programmer Replacement (Exchange Vacuum Harness Connector from Original Programmer)

Models: 
1991-92 Cadillac Fleetwood
1991-93 Cadillac DeVille, Sixty Special

Condition

Some owners may comment that the HVAC system remains stuck in the "Defrost" mode after a programmer replacement.

Cause

This condition may be caused by the shape of the vacuum harness connector inside of the new programmer.

Correction

This condition may be corrected by removing the vacuum harness connector manifold from the original programmer and exchanging it with the
replacement programmer. Use the following procedure to exchange the vacuum harness connector manifold.

Remove or Disconnect

1.

Right side sound insulator.

2.

I/P compartment.

3.

Vacuum harness and electrical connectors from programmer.

4.

Programmer from vehicle.

5.

Cover from programmer.

6.

Existing vacuum harness from programmer.

Install or Connect

1.

Vacuum harness from original programmer to replacement programmer.

2.

Cover to programmer.

3.

Programmer to vehicle.

4.

Vacuum harness and electrical connector to programmer.

5.

I/P compartment.

6.

Right side sound insulator.

If the condition is not corrected after following this procedure, the vacuum harness will require replacement

Warranty Information

Customer Interest:|631107|Page 5425 > < Vacuum Controller, HVAC|Locations