Fleetwood FWD V8-252 4.1L (1986)
1. Depress and release "ECON" button on the Climate Control Panel (CCP). The cooling fans override mode begins as the display switches from
Code .7.0 to Code F.8.5. It is possible to leave the cooling fans override mode at any time and return to .7.0 by clearing ECM or BCM codes.
2. To command "high fans" hold in the "Hi" button on the CCP. Fan speed should increase until the maximum speed is achieved. Releasing the "Hi"
button will return the calculation of fan speed to automatic BCM control.
3. To command "fans off" hold the "Lo" button on the CCP. Fan speed should decrease until the fans are completely stopped. Releasing the "Lo"
button will return the calculation of fan speed to automatic BCM control.
