Fleetwood FWD V8-252 4.1L (1986)
Figure 7 - Installing Inner Clamp
4.
Air bladder over inner tube, continue folding bottom up. Position top of air bladder as indicated in Figure 7.
IMPORTANT:
Do not use tools to fold the air bladder. Use of tools can cause damage to the air bladder resulting in leaks.
Figure 7 - Installing Inner Clamp
5.
Inner clamp to top of air bladder at specified dimension, see Figure 7.
6.
Tighten inner clamp with J-34649.
7.
Fold bottom of air bladder up and fold top of 102 mm (4") section down.
8.
Apply silicone lubricant to polished diameter of inner tube shaft.
9.
Outer tube over air bladder and push down against folded portion of air bladder.
IMPORTANT:
Outer tube must be completely seated over shaft.
10.
Upper mount to strut and position as indicated.
