cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

All Technical Service Bulletins for Suspension Spring ( Coil / Leaf ):|87101|Page 4931 > < All Technical Service Bulletins for Suspension Spring ( Coil / Leaf ):|87101|Page 4929
Page 5
background image

Recheck Trim Heights

Install springs and recheck trim heights.

Figure 8 - Checking Bumper Heights

Check Bumper Heights

Remove everything except jack and spare tire assembly from the trunk. Make sure vehicle has a full tank of fuel or add compensating weight (one gallon
of fuel weighs approximately 6 pounds). Set tire pressures, refer to tire placard on the rear face of the driver's door. Jounce front and rear of vehicle.
Check bumper heights as outlined in Figure 8.
Check Headlight Alignment

Check headlight alignment and adjust if necessary.

Check Front and Rear Suspension Alignment

Check front and rear suspension alignment using the specifications listed in Section 3A of the appropriate Service Information Manual.

All Technical Service Bulletins for Suspension Spring ( Coil / Leaf ):|87101|Page 4931 > < All Technical Service Bulletins for Suspension Spring ( Coil / Leaf ):|87101|Page 4929