Fleetwood FWD V8-273 4.5L (1988)
Engine Mount: Service and Repair
Fig. 1 Right side engine, brace & transaxle mount
RIGHT SIDE
1.
Remove brace from engine bracket to engine, Fig. 1.
2.
Remove two nuts securing engine bracket to mount.
3.
Raise and support vehicle.
4.
Remove two nuts securing engine mount to frame.
5.
Remove two nuts securing transaxle bracket to frame.
6.
Remove two nuts securing transaxle mount to frame bracket.
7.
Attach suitable engine lifting equipment to engine and raise engine until bracket is free from engine mount and transaxle mount.
8.
Remove stud and two bolts securing bracket to block.
9.
Remove mount and bracket by pulling forward.
10.
Remove transaxle mount bracket from transaxle.
11.
Remove engine mount assembly.
12.
Reverse procedure to install.
Fig. 2 Left side engine & transaxle assembly mounts