Fleetwood FWD V8-273 4.5L (1988)
Control Module HVAC: Service and Repair
Power Module Replace
Removal
Power Module Location
REMOVE OR DISCONNECT
WARNING: The heat sink of the power module may be very hot. Do not touch the heat sink if it has been operating because it may burn your
hands.
1. Electrical connectors.
2. Mounting screws.
3. Power module from evaporator module.
Installation
Power Module Location
1. Power module and screws to evaporator module.
-
Tighten screws to 1.4 Nm (12 lbs. in.).
2. Electrical connectors to power module.
