Fleetwood FWD V8-273 4.5L (1988)
Refrigerant Pressure Sensor / Switch: Service and Repair
Low Pressure Switch Replace
DEVILLE, ELDORADO, FLEETWOOD & SEVILLE
Under normal conditions, it is not necessary to discharge system refrigerant during this procedure, as switch unit fitting is supplied with a
Schrader valve.
1.
Disconnect battery ground cable.
2.
Disconnect electrical connector from low pressure switch.
3.
Remove switch from accumulator on DeVille and Fleetwood models, or from refrigerant line on Eldorado and Seville models.
4.
Reverse procedure to install.
