Fleetwood FWD V8-273 4.5L (1988)
Engine Support Fixture J-28467.
TOOLS REQUIRED:
^
J 28467 Engine Support Fixture
^
J 34754 Drive Axle Boot Seal Protectors
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Air cleaner assembly.
3. Install engine support fixture J 28467.
4. Upper case side cover bolts and fuel pipe bracket.
5. Raise vehicle and suitably support.
6. Left front wheel and tire assembly.
7. Left ball joint from steering knuckle.
8. Stabilizer bolt and bushing from left control arm.
9. Left engine splash shield (to provide improved access).
10. Vacuum pump mounting bolts, support to prevent hose or wiring damage.
11. Install drive axle boot seal protectors J 34754.
12. Drive axle from transaxle. Set to side (rear) and support properly.
