Fleetwood FWD V8-300 4.9L (1993)
8.
Install 3M # 06382 Scotch Mount Super Automotive Attachment Tape or equivalent along the top and bottom edge of the rub strip. Trim away
excess tape around the sidemarker lamp opening.
9.
Remove the release paper and install the rub strip to the molding, locating it around the sidemarker lamp. Press rub strip firmly in place with a roll
pin or equivalent.
PART AVAILABILITY:
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
For vehicles repaired under warranty (see illustration)