Fleetwood FWD V8-300 4.9L (1993)
5.
Align the foam seal vertically to the front lower door surface and install it just forward of the front drain hole. (See illustration.) After installation,
press seal firmly to fully seat the seal to the door.
NOTE:
In some cases it may be necessary to adjust the door inboard so that the lower auxiliary contacts the rocker.
*
We believe these sources and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not
endorse, indicate any preference for or assume any responsibility for the products or equipment from these firms or for any such items which may
be available from other sources.
PART AVAILABILITY:
Parts are expected to be available on 2/07/94 from GMSPO.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation: T-3358
Labor Time: 0.3 Hr. (For Both Sides)
