Fleetwood FWD V8-300 4.9L (1993)
pan-to-front cover bolts. This will prevent oil leakage through the bolt threads.
^
Put a 1/4" bead of RTV on the oil pan where the oil pan, block and front cover join together. The 1/4" bead is required because the front cover
has a rounded corner instead of square. If the extra RTV is not applied an oil leak may occur.
^
Any excess RTV, squeezed out of the sealing area, should be removed.
2. Front cover.
3. Crankshaft damper.
4. Lower vehicle.
5. Water pump.
6. Water pump pulley.
7. Serpentine belt.
8. Coolant reservoir and R/H cross car brace.
9. Negative battery cable.
10. Engine coolant.
11. Start engine and check for leaks at front cover, water pump and water inlet.
