Fleetwood FWD V8-300 4.9L (1993)
Air Door Actuator / Motor: Service and Repair
Installation
Component Locations
Component Locations
INSTALL OR CONNECT
1. Screws after positioning air mix valve actuator.
-
Tighten screws to 1.4 Nm (12 lbs. in.).
2. Electrical connector to air valve actuator.
NOTE: Before connecting air mix valve link rod during installation, do the Air Mix Valve Link Adjustment. Refer to Adjustments.
3. Air mix valve link rod to air mix valve (snap in).
4. Push on nuts after positioning right sound insulator.
5. Screws retaining right sound insulator.