Fleetwood FWD V8-300 4.9L (1993)
Alignment: Service and Repair
Front Wheel Alignment
Notes
Camber and toe are the only adjustments normally required. After checking settings, perform adjustments in the following order: caster, camber and
toe in.
Front Caster Adjustment
Fig. 2 Caster Adjustment. 1991-92 Bonneville, LeSabre, Park Avenue, 88 & 98
Fig. 3 Cross Brace Removal. 1991-92 98 & Park Avenue
1.
On Bonneville, 88 and LeSabre models, remove three strut to body attaching nuts, Fig. 2.
2.
On 98 and Park Avenue models, proceed as follows:
a. Loosen cross brace assembly through bolts, Fig. 3.
b. Remove inboard strut nuts, then the brace assembly.
c. Remove remaining nut over oval strut mounting hole, Fig. 2.
3.
On all models, lift front of vehicle by body to separate strut from inner wheelhouse.
4.
Drill two 11/32 inch holes at front and rear of oval strut mounting hole.
5.
File excess metal to elongate original holes, then paint exposed metal with primer.