Fleetwood FWD V8-300 4.9L (1993)
INSTALL OR CONNECT
1. Distributor with rotor in same position as noted in removal step 6.
2. Hold down clamp and distributor clamp nut lightly snug.
3. Six terminal PCM harness.
4. Distributor cap.
5. Four (4) retaining bolts.
6. Ignition coil connector to cap.
7. Ignition switch battery feed wire.
8. Adjust ignition timing.
9. Tighten distributor hold-down nut using J 29791 or equivalent to 25 Nm (20 lb. ft.).
