Fleetwood FWD V8-300 4.9L (1993)
Oil Pressure Switch (For Fuel Pump): Service and Repair
Oil Pressure/Fuel Pump Switch
The oil pressure switch is mounted on the rear of the engine on the oil filter adapter.
REMOVAL:
1.
Remove the locking collar.
2.
Disconnect the electrical connector.
3.
Remove the oil pressure switch.
INSTALLATION:
1.
Make sure the fittings are properly aligned to allow sensor installation.
2.
Install the oil pressure switch.
3.
Connect the electrical connector.
4.
Install the locking collar.
