cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

All Technical Service Bulletins for Fluid Line/Hose:|93C55|Page 4325 > < All Technical Service Bulletins for Fluid Line/Hose:|93C55|Page 4323
Page 3
background image

5.

Tighten line fitting to ball check fitting to 27 N-m (20 lb.ft.).

6.

Assemble hose end to pipe. Install hose until stop on pipe is reached.

7.

Install two (2) new hose clamps (Part Number 3524502) on hose at pipe end (install both clamps even if only one was removed). Tighten clamps
to 1.8 N-m (16 lb.in.).

8.

Fill transaxle to proper level with DEXRON (R) IIE fluid. Start vehicle and check for fluid leaks.

Notice:

Ensure that both the upper and lower transaxle oil cooler lines are securely seated in their designated retainers. See callout (C) on illustration.

9.

Install Campaign Completion Label.

Campaign Completion Label

Upon completion of this campaign, a Campaign Completion Label (CAT. NO. S-1015) should be affixed on a clean, dry surface of the radiator core
support in an area clearly visible when the hood is raised. Each label provides space to print in ink (or type) campaign number 93-C-55 and your
five-digit Cadillac dealer code. Dealers are to take the steps necessary to ensure that these numbers are recorded and the label is properly affixed.

Warranty Information

Credit for this campaign will be issued upon receipt of a properly prepared warranty claim which includes the information:

Owner Letter

November, 1994

Dear Cadillac Owner:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

General Motors has determined that a defect which relates to motor vehicle safety exists in all 1991-1993 FWD model Cadillac DeVilles, Fleetwoods
and Sixty Specials equipped with the 4.9L engine (VIN Code B). These vehicles have an upper transaxle oil cooler hose which could pull out of the
crimped coupling at the transaxle end of the line assembly. Under certain climate conditions and under certain driving conditions, if this coupling were to
separate and an ignition source were present, an engine compartment fire could occur.

To prevent this condition from occurring, your Cadillac dealer will install a new upper transaxle oil cooler line (to transaxle) on your vehicle. Of course,
this service will be performed at no cost to you.

The mailing of this letter has been coordinated to ensure that instructions for making this repair have been received by your dealer and that needed parts
are available for your car. Please contact your Cadillac dealer as soon as possible to arrange a service appointment and courtesy transportation, if
required. Please ask your dealer if you wish to know how much time is needed to perform this repair and process your vehicle.

The enclosed Campaign Owner Identification Card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary
corrections in the shortest possible time. If you no longer own this vehicle, please let us know by completing this postage-paid reply card and returning it
to us.

All Technical Service Bulletins for Fluid Line/Hose:|93C55|Page 4325 > < All Technical Service Bulletins for Fluid Line/Hose:|93C55|Page 4323