Fleetwood FWD V8-300 4.9L (1993)
REMOVE OR DISCONNECT
1. Screw.
2. Switch plate and unplug connector.
INSTALL OR CONNECT
1. Position lock switch plate and install connector.
2. Position lock switch plate into trim panel and secure with screw.
Appliques
NOTE: Appliques are attached to the trim panel by the use of inverted nuts.
REMOVE OR DISCONNECT
1. Trim panel.
2. Place trim panel on a clean surface.
3. Inverted nuts retaining appliques using tool J 28626 or equivalent.
4. Applique.
INSTALL OR CONNECT
1. Applique to trim panel.
2. Inverted nuts using tool J 28626 or equivalent.
3. Trim panel.
Courtesy Lamps
REMOVE OR DISCONNECT
1. Lenses. Using a thin bladed tool, carefully pry the lenses off.
2. Bulb as necessary.
3. Pinch courtesy lamp retainers and pull out lamp socket holder.
4. Courtesy lamp connector.
INSTALL OR CONNECT
1. Courtesy lamp connector.
2. Lamp socket holder.
3. Bulb (if removed).
4. Snap lenses into place.
Front Door Trim Panel
