Full Size Cad RWD V8-350 5.7L DSL (1984)
Steering Column Lock: All Technical Service Bulletins
Steering Column - Rattling Noise
Bulletin No. T 84-63 File In Group 3B Number 12 Date Apr. '84
SUBJECT:
STEERING COLUMN NOISE
MODELS AFFECTED: ALL 1984 MODELS EQUIPPED WITH TILT STEERING COLUMN
FIGURE 1 - Steering Column
Some 1984 Cadillacs equipped with tilt or tilt and telescope steering columns may experience a rattling noise in the area of the ignition lock. This
condition may result from inadequate lubrication of the lock bolt.
To correct this condition, remove the lock housing cover using the procedure outlined in Section 3B3 of the 1984 Service Information Manual. Liberally
coat the exposed area of the lock bolt with lithium base chassis grease (refer to Figure 1) and reassemble.
For warranty purposes, use Labor Operation No. E7220 at 0.9 hour.
