Seville V8-273 4.5L (1989)
Driver/Vehicle Information Display: Adjustments
SETTING THE TIME
Use the following procedure to set the time on the clock. This is the same procedure outlined in the owner's manual.
^
Below the row of driver information center buttons, locate the small hole to the right of the words "date/time set."
^
Insert a pen or other pointed object into the hole.
^
Press the pen into the hole to move the time functions from right to left. When each function is ready to be set, it will flash. On the first push, the
minutes will flash, on the second push, the hours will flash, a third push and the date will flash, a fourth push and the month will flash, a fifth push
and the year will flash and, on the sixth push, you will exit the time set function.
^
Notice the arrow symbols on the left of the driver information center panel. A down arrow is above the "Time-Temp" button and an up arrow is
above the "Range" button. Pressing "Time-Temp" reverses and pushing "Range" advances the numbers or months. Push these buttons in quickly to
change the numbers one at a time, or hold the button in to rapidly change the numbers.