Seville V8-273 4.5L (1989)
FIGURE 3 - LET-DOWN PANEL
"The Let-Down Panel":
The let-down panel should be used as an aid to determine the approximate number of pearl coats (mid-coats) that will be necessary to achieve a proper
color match. This is done by comparing the various pearl coat film build areas on the let-down panel to a panel adjacent to the repair area prior to
starting the repair. It can be made in the following manner, refer to Figure 3:
1.
Apply the white base to hiding.
2.
Mask the panel in five sections leaving the first section exposed.
3.
Apply a single medium wet coat of the pearl material.