Seville V8-273 4.5L (1989)
Fig. 1 Delco-Moraine Series 3264M Front Disc Brake Caliper Exploded View.
Fig. 3 Installing Support Bushing
Bushing & Boot Replacement
1.
Remove mounting bracket from vehicle.
2.
Remove bolt boots from support bushings, Fig. 1.
3.
Clamp bracket in a suitable vise, then pry support bushings from inner bushings in bracket ears with small screwdriver.
4.
Using a paper clip, pull inner bushings from mounting bracket ears.
5.
Lubricate inner bushings with silicone based grease, then install bushings flush with bracket ears.
6.
Position .080-.090 inch thick shim stock on bracket ear face, then tap support bushings, with plastic mallet, into inner bushings, Fig. 3. When
properly installed, bushing should protrude .080-.090 inch above bracket ear face.
7.
Snap new bolt boots over support bushing lip.