Seville V8-273 4.5L (1989)
CAUTION: Wear gloves when removing heat shield
8. Two module cover retaining screws (1 1Omm screw and one 7mm screw)
9. Lower car and rotate engine forward
10. Air cleaner
11. E.G.R. solonoid and move electrical harness to gain access
12. Module cover screws (5) 3 upper and 2 on right hand side
13. Power module and electrical connectors
14. Module cover with sound barrier and seal
15. Evaporator core
Tighten
Evaporator block fitting bolt (5), 17 N m
Module cover retaining bolts (4) 3 N m