Seville V8-273 4.5L (1989)
Ignition Coil: Service and Repair
Integral Coil
REMOVAL
-
Remove distributor cap.
-
Remove coil cover attaching screws, and lift off cover.
-
Remove coil attaching screws and lift ignition coil and leads from cap.
-
Push up on the coil leads to dislodge them from the cap, otherwise they could break.
-
Remove arc seal and brush with spring.
INSTALLATION
-
Install brush with spring.
-
Install arc seal.
-
Install coil into cap. Guide coil leads into cap, otherwise they could break.
-
Install coil cover and attaching screws.
-
Install distributor cap.