cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

All Technical Service Bulletins for Throttle Valve Cable/Linkage:|9312|Page 3413 > < All Technical Service Bulletins for Throttle Valve Cable/Linkage:|9312|Page 3411
Page 8
background image

1.

3-2 Control Valve Spring (341). Refer to Figure 5.

2.

Spacer Plate Gaskets.

3.

Instruction Sheet.

IMPORTANT:
Service Replacement Transaxle Assemblies (SRTA) are built with original calibrations ancts may need to be updated with a service 3-2 control valve
spring per customer requirements.

Parts are currently available from GMSPO.

Refer to the Hydra-Matic 4T60 (ME9) Automatic Transaxle Unit Repair Table of Contents for control valve assembly information.

VI. Harsh 3-2 Shift Maneuver At 17-20 MPH

1985-1986 DeVilles and Fleetwoods and 1986 Eldorados and Sevilles

A 3-2 shift maneuver is obtained by allowing the vehicle to coast down to 17-20 mph (with closed or zero throttle) and then stepping into the throttle to
obtain a 3-2 shift.

At start of production (SOP) 1987 an orifice pipe was added between the 1-2 servo release cover plate and the 3-2 coast down valve to allow a smoother

All Technical Service Bulletins for Throttle Valve Cable/Linkage:|9312|Page 3413 > < All Technical Service Bulletins for Throttle Valve Cable/Linkage:|9312|Page 3411