Seville V8-4.9L VIN B (1995)
Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming and Arming
WARNING: The Diagnostic Energy Reserve Module or Sensing And Diagnostic Module (DERM/SDM) can maintain enough voltage to cause
air bag deployment for up to two minutes after the ignition switch is turned off and the battery is disconnected. Servicing the SIR system
during this period may result in accidental deployment and personal injury.
1. Ensure front wheels are pointed straight ahead.
2. Turn ignition switch to LOCK position and remove SIR or AIR BAG fuse.
3. Remove left sound insulator. If necessary, remove courtesy lamp from sound insulator.
4. Disconnect Connector Position Assurance (CPA), then both yellow 2-way SIR electrical connectors at base of steering column.
5. Remove righthand sound insulator and disconnect CPA and yellow 2-way connector from passenger's inflator pigtail.
6. Wait at least 2 minutes before proceeding with diagnosis or service.