Seville STS V8-4.6L VIN 9 (1998)
Antenna, TV: Service and Repair
REMOVAL PROCEDURE
TV Antenna Module Replacement: Removal Procedure
1. Remove rear shelf trim panel.
2. Remove the electrical connectors from the TV antenna module.
3. Remove the fastener retaining the TV antenna module.
4. Remove the TV antenna module.
INSTALLATION PROCEDURE
TV Antenna Module Replacement: Installation Procedure
1. Install the TV antenna module, ensuring the locating tab is positioned properly.
2. Install the retaining fastener.
Tighten
Tighten the TV antenna module fastener to 10 N.m (89 lb in).
3. Connect the electrical connectors to the TV antenna module.
4. Install the rear shelf trim panel.