Seville STS V8-4.6L VIN 9 (1998)
Console Replacement (LHD): Removal Procedure
16. Partially remove the seats and slide the seats rearward.
17. Remove the two bolts (1) securing the metal bracket arms to the floor.
IMPORTANT: Use care when removing the console. The metal bracket can come in contact with the seats and damage the material.
18. Lift up the rear of the console and slide rearward.
19. Feed the wiring harness out of the shifter opening and the left side of the console.
INSTALLATION PROCEDURE
Console Replacement (LHD): Installation Procedure
1. Position console assembly into position and feed wiring harness back into original position.
IMPORTANT: Use care when installing the console. The metal bracket can come in contact with the seats and damage the material.
2. Lift up on the rear on console and slide forward to align front edges of the console with the IP lower and sit rear of console onto rear studs.
3. Install the fasteners (1) to the metal bracket arms on the console.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).
Console Replacement (LHD): Installation Procedure
4. Install the seats.
5. Connect electrical connectors (1 through 3) on both sides of the console.
