Seville STS V8-4.6L VIN 9 (1998)
Front Carpet Retainer
REMOVAL PROCEDURE
Carpet Retainer Replacement (Front): Removal Procedure
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
1. Using a J 38778 release the retainer clips from the rocker panel.
2. Slide the garnish molding from behind the hood release cable on the driver's side.
3. Remove the front carpet retainer.
4. If the clips come out of the retainers, turn 90° in hole and lift out of the slot.
INSTALLATION PROCEDURE
Carpet Retainer Replacement (Front): Installation Procedure
1. Slide the garnish molding behind the hood release cable on the driver's side.
2. Align the front carpet retainer with the slots in the rocker.
3. Pressing down, engage the retainers into the slots in the rocker panel.
Rear Carpet Retainer
REMOVAL PROCEDURE