Seville STS V8-4.6L VIN 9 (1998)
Head Rest: Service and Repair
Headrest Replacement - Front Seat
REMOVAL PROCEDURE
Headrest Replacement - Front Seat: Removal Procedure
1. Remove seat back trim cover.
2. Remove seat belt post rear cover.
3. Remove upper front seat belt post cover.
4. Remove headrest from support shaft.
^
Insert a small flat-bladed tool in the top and bottom of the support shaft opening.
^
Push in on the flat-bladed tool to release the headrest retaining clips.
^
Pull the headrest from the support shaft.
INSTALLATION PROCEDURE
Headrest Replacement - Front Seat: Installation Procedure
1. Install the headrest onto the shaft. Apply pressure until the clips engage.
2. Install upper front seat belt post cover.
3. Install rear seat belt post cover.
4. Install seat back trim cover.