Seville STS V8-4.6L VIN 9 (1998)
Disclaimer
Correction
1.
Determine which heat element is not functioning properly by measuring the resistance values of the factory heat elements. Refer to the appropriate
diagnostic procedure (1st, 2nd or 3rd Design, Front/Rear) in this bulletin.
2.
If the resistance values of a factory heat element are NOT within the specified range, install a service heat element between the non-functioning
factory heat element and the seat trim cover. Refer to the Service Heat Element Installation Procedure in this bulletin.
1st Design-Front Seat Heat Diagnostic Procedure for 1998-2000 MY Built BEFORE VIN YU204670
