Seville STS V8-4.6L VIN 9 (1998)
Brake Caliper: Service and Repair
Brake Caliper Bracket Overhaul
OVERHAUL PROCEDURE
1. Remove the caliper anchor bracket. Refer to Brake Caliper Bracket Replacement.
2. Mount the anchor bracket (13) in a vise.
3. Remove the Pin bolt boots (4) from caliper anchor bracket (13).
4. Remove the bushings (2) from the anchor bracket mounting bores. Use a screwdriver or punch to bend the bushings inward and extract bushings
with needle nose pliers.
IMPORTANT:
^
Clean all parts in clean, denatured alcohol. Dry with unlubricated compressed air.
^
Inspect the caliper anchor bracket for cracks. If cracked, replace bracket.
5. Lubricate and install new bushings into bracket mounting bores.
6. Lubricate and install new pin bolt boots onto the anchor bracket.
7. Install the anchor bracket onto the vehicle. Refer to Brake Caliper Bracket Replacement.
