Seville STS V8-4.6L VIN 9 (1998)
Technical Service Bulletin # 01-05-23-003
Date: 010301
Front/Rear Brakes - Revised Tool Requirements
File In Section: 05 - Brakes
Bulletin No.: 01-05-23-003
Date: March, 2001
SERVICE MANUAL UPDATE
Subject:
Revised Tool Requirements for Front and Rear Brake Caliper Overhaul
Models:
1997-2001
Buick Park Avenue, Regal
1997-2001
Buick Regal (Export China)
2000-2001
Buick LeSabre
1997-2001
Cadillac DeVille, Seville
2000-2001
Cadillac Eldorado
1997-2001
Chevrolet Trans Sport (Export China), Venture
2000-2001
Chevrolet Impala, Lumina, Monte Carlo
1997-2001
Oldsmobile Aurora, Silhouette
1998-2001
Oldsmobile Intrigue
1997-2001
Pontiac Grand Prix, Montana, Trans Sport
2000-2001
Pontiac Bonneville
This bulletin is being issued to revise the tool requirements for the front and rear brake caliper overhaul procedures in the Disc-Brake sub-section of
Brakes in the appropriate Service Manual. Please use the following to replace the existing information in the Service Manual.
This information has been updated within SI2000. If you are using a paper version of this Service Manual, please mark a reference to this bulletin on the
affected page in the Disc Brake sub-section of the Service Manual.
DISCLAIMER
Front Brake Caliper Overhaul Procedure
(All Above Listed Vehicles)
Caution:
Do not place fingers in front of the caliper piston(s) in an attempt to catch or protect it when applying compressed air. The piston(s) can fly out with
force and could result in serious bodily injury.
Notice:
Use clean cloths to pad the interior of the caliper housing during piston removal. Use just enough air to ease the piston out of the bores. If the pistons
are blown out, even with the padding provided it may be damaged.
