Seville STS V8-4.6L VIN 9 (1998)
Cruise Control Switch: Service and Repair
Cruise Control Switch Assembly - Pivot and Pulse(Control)
DISASSEMBLY PROCEDURE
1. Remove the upper and lower shrouds. Refer to SHROUDS, SHIFT LEVER SEAL.
2. The column should be fully extended out before the disassembly procedure.
Remove the two wire harness straps (2). Remove one wire harness strap (2) from the steering column tilt head assembly (1).
3. Pop the wire harness assembly (1) from the wire harness strap (2).
4. When working on the power tilt and telescope column remove 3 wire harness straps (2). Remove one wire harness strap (1).