Seville STS V8-4.6L VIN 9 (1998)
8. Disconnect the cable harness clip at the cam cover. Place the cable out of the way.
9. Disconnect the PCV (2) fresh air tube from the cam cover.
10. Disconnect the water pump drive belt.
11. Remove the EGR tube.
12. Remove the water pump pulley using J 38825.
13. Remove the camshaft seal retainer screws.
14. Remove the camshaft seal.
15. Remove the cam cover screws.
16. Remove the cam cover by moving the cam drive end of the cover up.
