Seville STS V8-4.6L VIN 9 (1998)
7. Remove the nut securing the to the frame.
8. Lower the vehicle.
9. Remove the two upper bolts securing the motor bracket to the engine.
10. Remove the mount and bracket.
INSTALLATION PROCEDURE
1. Install the mount and bracket.
2. Loosely install the two upper bolts securing the mount bracket to the engine.
3. Raise and support the vehicle.
4. Install the engine support brace.
5. Install two nuts securing the support brace and the bolt to the support brace.
5.1. Tighten the nuts and bolts in the following sequence.
5.2. Tighten the mount bracket left nut to 50 Nm (37 ft. lbs.).
5.3. Tighten the right mount bracket nut to 50 Nm (37 ft. lbs.).
5.4. Tighten the motor brace bolt to 50 Nm (37 ft. lbs.).
5.5. Tighten the two upper mount brace bolts to 50 Nm (37 ft. lbs.).
6. Remove the J28467-A Engine Support Fixture.
