Seville STS V8-4.6L VIN 9 (1998)
Hazard Warning Switch: Service and Repair
REMOVAL PROCEDURE
Hazard Flasher Switch Replacement: Removal Procedure
1. Disable PSIR. Refer to Disabling the SIR System in SIR.
2. Remove IP upper trim pad.
3. Remove right woodgrain trim panel.
4. Remove electrical connector from hazard switch.
5. Use a flat blade tool to disengage retainers from the switch.
Hazard Flasher Switch Replacement: Removal Procedure
6. Remove switch from air outlet duct.
INSTALLATION PROCEDURE
