Seville STS V8-4.6L VIN 9 (1998)
7. When working on the power tilt and telescope column install the wire harness assembly (2) into the lower wire shield (1).
In the lower wire shield (1) notice the direction (3) and placement the wires go in.
8. When working on the power tilt and telescope; column slide the Steering Column interface module assembly (2) into the lower wire shield (1).
9. When working on the power tilt and telescope column install the green (5), brown (4), natural (3) and the black (2) connectors into the Steering
Column interface module assembly (1).
