Seville STS V8-4.6L VIN 9 (1998)
10. Pull the modular fuel sender straight up while pumping the fuel from the reservoir.
11. Clean the fuel sender assembly O-ring sealing surfaces.
12. Inspect the fuel sender assembly O-ring sealing surfaces.
Installation Procedure
Important: Always replace the fuel sender O-ring when reinstalling the fuel sender assembly.
1. Position the new fuel sender assembly O-ring on the fuel tank.
Important: Care should be taken not to fold over or twist the fuel pump strainer when installing the fuel sender assembly as this will restrict fuel
flow. Also, assure that the fuel pump strainer does not block full travel of float arm.
