Seville STS V8-4.6L VIN 9 (1998)
Throttle Position Sensor: Service and Repair
TP Sensor Replacement
Removal Procedure
1. Remove the rear seat cushion.
2. Disconnect the negative battery cable to avoid accidental starting of the engine.
Throttle Body And Coolant Pipes
3. Remove the Throttle Body Assembly.
Description
4. Remove the TP sensor (1) mounting bolts (4) from the TP sensor.
5. Remove the TP sensor (1) from the throttle body.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.