Seville STS V8-4.6L VIN 9 (1998)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement
Removal Procedure
1. Remove the electrical connector at the cam sensor.
Description
2. Remove the retaining bolt (1) and cam sensor (2).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
Description
1. Install the cam sensor (2) and retaining bolt (1)
Tighten the retaining bolt to 10 N.m (89 lb in).
2. Install the electrical connector at the cam sensor.