Seville STS V8-4.6L VIN 9 (1998)
49. Twist together, bend, and tape the remaining connector wire lead to the remaining deployment wire.
50. Connect the deployment harness to the driver side air bag/pretensioner yellow 6-way connector.
51. Route the deployment harness out of the driver side of the vehicle.
52. Disconnect the passenger side air bag/pretensioner yellow 6-way connector (2) located under the passenger seat (1).
53. Cut the two pretensioner wires (terminals A and F) leading to the yellow 6-way harness connector, leaving at least 16 cm (6 in) of wire at the
connector.