Seville STS V8-4.6L VIN 9 (1998)
2. To install the SIR coil assembly.
^
Make sure the wheels are straight ahead.
^
Align the block tooth and the centering mark on the race & upper shaft assembly (1) at the 12 o'clock position.
3. Ensure the SIR coil assembly is centered. The new SIR coil assembly will be precentered. Pull the tab and remove. Do not depress the tab (1) on
the back of the SIR coil assembly.
4. Align the SIR coil assembly (1) with the horn tower on the turn signal cancel cam assembly (2).
