Seville STS V8-4.6L VIN 9 (1998)
Removal Procedure
1. Remove the seat belt pretensioner. Refer to Seat Belt Side Buckle Pretensioner Replace-Driver or Pass Seat Belt Buckle Pretensioner
Replacement. See: Driver Replacement
2. Remove the shrink wrapping from the seat belt pretensioner harness.
3. Disconnect the harness from the seat belt - pretensioner.
Installation Procedure
1. Install the harness to the seat belt pretensioner.
2. Securely wrap electrical tape over the seat belt pretensioner harness connection.
3. Install the seat belt pretensioner to the seat. Refer to Seat Belt Side Buckle Pretensioner Replace-Driver or Pass Seat Belt Buckle Pretensioner
Replacement. See: Seat Belt Buckle/Service and Repair/Seat Belt Buckle Replace
