Seville STS V8-4.6L VIN 9 (1998)
10. Maintain the fluid level at the Full Cold mark (1).
11. The fluid must be free of bubbles. If bubbles exist, check the connections again and repair as necessary. Repeat steps 5, 6 and 7 for fuming the
steering wheel while checking the power steering fluid.
12. Start the engine.
13. Maintain the power steering fluid level while the engine idles.
14. Reinstall the cap.
15. Return the wheels to the center.
16. Lower the front wheels to the ground.
17. Keep the engine running for two minutes.
18. Turn the steering wheel in both directions.
19. If all the following conditions exist, the procedure is complete:
20. If any of the following conditions do not exist, proceed to Special Conditions For Bleeding:
^
The system has smooth power assist
^
The system has noiseless operation
^
The power steering fluid is filled to the proper level
^
There are no system leaks
^
The power steering fluid is not discolored and is free of bubbles and foam
