Seville STS V8-4.6L VIN 9 (1998)
Cross-Member: Service and Repair
Forward Body Mount Replacement
REMOVAL PROCEDURE
1. Raise the vehicle and suitably support.
2. Remove wheels and tires.
3. Remove the exhaust system. Refer to EXHAUST SYSTEM Replacement.
4. Support forward end of the rear suspension support with a suitable jack.
5. Remove the forward body mount brackets at the support assembly.
6. Remove the two bolts securing the front of the support assembly to the vehicle.
7. Lower the jack to allow the front end of the support assembly to lower enough to allow for removal of the mounts.
8. Using a punch, bend the tabs on the mount inboard (1) and then tap the mount downward and out of the support assembly.
INSTALLATION PROCEDURE