Seville STS V8-4.6L VIN 9 (1998)
8. Using a heat gun apply heat to the repair area.
^
Hold the heat gun nozzle 25 mm (1 in) from the repair surface.
^
Use a minimum temperature of 50°C (200°F).
^
Apply heat for 2 to 3 minutes.
9. Replace the rear defogger fuse.
10. Test the defogger operation to verify the grid line is repaired.
11. Inspect the grid line repair for appearance.
11.1.
Apply tincture of iodine to the grid line using a pipe cleaner or a fine brush if the grid line appears discolored.
11.2.
Allow the iodine to dry for at least 30 seconds.
11.3.
Wipe off any excess iodine using a lint free cloth.
12. Allow the repair area to cure undisturbed for at least 24 hours.
