Seville STS V8-4.6L VIN 9 (1998)
Rear Door Power Window Switch Replacement: Removal Procedure
REMOVAL PROCEDURE
1. Insert a flat bladed tool under to rear edge of the window switch plate.
2. Push the tool firmly towards the switch plate to disengage the retention clip.
IMPORTANT: Before lifting the switch plate from the door trim panel, ensure that the flat bladed tool has fully disengaged the retainer clip.
Otherwise damage to the switch plate or the retainer clip may occur.
3. Lift up on the rear of the switch plate and remove it from the door trim panel.
Rear Door Power Window Switch Replacement: Removal Procedure
4. Disconnect the electrical connector.
5. Remove the switch plate.
Rear Door Power Window Switch Replacement: Installation Procedure
INSTALLATION PROCEDURE
1. Install the electrical connectors.
2. Install the switch plate into the door trim panel.
3. Press down on the switch plate evenly to engage the retainer clips.
