Seville STS V8-4.6L VIN 9 (1998)
Tighten
Tighten the window retainer clamp bolts to 11 Nm (97 lb in).
7. Install the water deflector.
8. Install the door trim panel.
Window Regulator Motor
WINDOW REGULATOR MOTOR
Motor Replacement - Power Window: Removal Procedure
REMOVAL PROCEDURE
1. Remove the window regulator. Refer to "Window Regulator".
2. Disconnect the electrical connector.
3. Remove the three bolts for gear case to window regulator.
Motor Replacement - Power Window: Removal Procedure
4. Remove the motor/gear case assembly.
Motor Replacement - Power Window: Installation Procedure
INSTALLATION PROCEDURE
1. Make sure window regulator is in the mid-travel position.
2. Install the motor/gear case assembly.
3. Install the three bolts for gear case to window regulator.
Tighten