SRX 2WD V8-4.6L VIN A (2004)
Global Positioning System Antenna: Service and Repair
Antenna Replacement - Global Positioning System (GPS)
ANTENNA REPLACEMENT - GLOBAL POSITIONING SYSTEM (GPS)
REMOVAL PROCEDURE
1. Remove the I/P retainer.
2. Remove the screws (1) securing the global position antenna to the I/P carrier.
3. Remove the wiring from the carrier.
IMPORTANT: Do not splice the wiring or make the antenna lead shorter.
INSTALLATION PROCEDURE
1. Route the antenna wire to the carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the antenna to the carrier.
Tighten
Tighten the screws (1) to 2 N.m (18 lb in).
3. Install the I/P retainer.