SRX 2WD V8-4.6L VIN A (2004)
Pedal Positioning Motor: Service and Repair
ADJUSTABLE BRAKE PEDAL MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the adjustable brake pedal from the vehicle.
2. In order to release the adjustable brake pedal cable from the adjustable brake pedal motor, carefully squeeze the collar of the cable and pull
outward from the motor.
IMPORTANT: Only remove the staked material or the head of the insert.
3. To remove the head of the factory motor inserts use a 3/16 in drill bit. Carefully drill the head of the factory motor insert (2) from the bottom side
of the adjustable brake pedal motor bracket (4).
4. Remove the adjustable brake pedal motor.
INSTALLATION PROCEDURE
IMPORTANT: Ensure that the adjustable accelerator pedal and adjustable brake pedal are synchronized in the full forward front of vehicle position.
